AMOLEN PLA Filament Glow in The Dark Multicolor Rainbow PLA Filament, Gradient 3D Printer Filament Color Change in 5 Meters, 1kg(2.2lbs) Spool

purchased for the multi color glow. after using almost half the spool to print one object the object does not glow in multi color only standard glow in the dark green. i have sent a message to the seller and will update this when they reply. UPDATE. within 24 hours i had a reply. Was asked to place in direct sunlight and then test for colors. if still green send them a picture and they would replace it. I placed in direct sunlight for the day and at dark it started to glow in multi colors.. it looks amazing.. Great product and support. Thank You

Works great with my printer. I love how it looks white but then is very colorful in the dark after being charged.

I'm sure from the reviews that many people that have gotten this filament haven't had issues with it. However, my experience is definitely on par with the other negative reviews that this filament has received. For several days and prints, I tried to get this filament to print properly, thinking it was something up with the printer; from the extruder, to my settings, to the nozzle, etc. Prints would *often* fail, most times close to the start of the print, with prints showing signs of a clogged nozzle. I would leave and come back to a stringy, tangled, and frizzy mess, with nothing coming out of the nozzle. When a print *did* finish, there would often be uneven layers, with some layers not being as wide as they should be. After some time, I came to realize that the problem wasn't my extruder, or my settings, or anything else with my printer. Apparently, the filament I received is *not* completely uniform all through the reel, as what was *actually* happening is that the filament was getting stuck in the bowden tube, due to being too thick at certain points. I used a brand new tube and still ended up with the same problem, and no other filament that I've used has given me this issue, so I know it was with the filament (not to mention looking at a cross section of the tube and filament, there was 0 space between the filament and tube. Removing the filament from the tube took a LOT of effort due to how stuck it was; filament shouldn't do that). I've since switched to the same type of filament from another brand, and it's working flawlessly. While I know not everyone will have my experience, if you do have these problems, it might be the filament.

The media could not be loaded.  This review is for the Multi-Color Glow in the dark (5m color change) PLA filament..... I will talk about the glow–affect as well, but 1st... Most importantly, this stuff prints amazingly smooth! I did not have to tweak my settings, AT ALL! I have a guider2 printer and use a .4mm micro swiss plated wear resistant nozzle. I used the hottest suggested setting, 220°C, as I’ve noticed in my personal experience that glow in the dark filament tends to like to be printed a little hotter. The heated bed was set to 50°C. I did not use a raft, however I always use a brim to help Adhesion. I also always use a glue stick. Cooling fan on 100% and 100% of the Print. I changed my shell count to 4, Top solid layer 4, bottom solid layers 4.The following are all the STANDARD PLA print slicer settings that my flash forge slicer auto recommends when you select PLA for the material. I’m only including it in case someone with another slicer has a different profile set up:-15% infill with a hexagon pattern-Base print speed 60mm/s-travel speed 80mm/s-first few layers max speed 30mm/s-again, fan always ON at 100% speedNow as for THE GLOW.... i’m not sure how I feel about the glow effect. I’ve included pictures of what the glow initially looks like after one hour of charging under a UV light. It’s rather bright. However, my iPhone camera picks up more of the actual color than you can actually see in real live viewing. Maybe it’s the brightness of the glow tends to make the color blend together? No, because the dimmer the glow effect got as it released the charge, I saw the same dull “actual colors”. Although you CAN see a difference in color, it is a very muted difference (The colors are not bold or vibrantly colored at all)...... The other thing I’m torn on, is the timing of the glow itself. As you can see in the first picture, as soon as I removed it from its light source, (regardless of the muted color issue) it was very bright! However, as you’ll see in the second picture (because I took a screenshot of the picture itself so it would include the time-stamp of when I took each picture... look on the very top of each pic) that “very bright glow” VERY QUICKLY (6 minutes later) faded into almost one color. A very dim one color at that. Again another six minutes later, the camera would not even pick up any color-glow at all. HOWEVER! I could still very clearly see a dim glowing green in real life viewing. And that green glow was actually STILL THERE in the morning when I woke up! Which was actually quite impressive!So I guess my take away from the entirety of this filament is (and this is only if this is exactly how this filament is intended to print and GLOW... not just a bad GLOW Batch): I 100% love how this stuff prints! It does in fact have different colors, but they are not very distinctive and do NOT last long when glowing. And again, I was 100% impressed at how LONG the GREEN-GLOW ended up actually glowing for! If the colors were more vibrant as advertised, I would’ve given this review 5⭐️Stars.

I did not have any problems with using this to print. The issue I found is, I tested the color after each print and even though it did, ever so slightly, change color, the picture they show above is misleading. I NEVER got a change of color as bright as they show. I even used a black light to charge it. I trying out another company because this is not what it is supposed to be.

Ive been 3D printing for just around a month, and I’d say this is the easiest filament to use that I came across. This filament prints great! It actually prints better than some of the normal PLA filaments that I’ve tried. The colors are vibrant in the dark, as you can see in the pics.I did order a hardened steel nozzle for pretty cheap (5 pack + a bunch of brass ones) at the same time I ordered this, since prior research indicated that this could be abrasive. I also upgraded my stock Ender 3v2 to a Capricorn Bowden tube. A quick change and I was good to go. I would definitely recommend this filament!

Amazing glow in the dark filament for price. great print quality and amount. Only think i have not been able to test would be how abrasive it is to the nozzle. from what i've seen so far, it isn't.

Ok I may be new but I don't think filament should produce anger and frustration. This filament is so brittle and very tangled on the spool which I think is why it broke some of time. For 2 days trying different things to get stick,print and stay stuck finally found glass plate with hairspray and bed temp of 50 and speed of 30 all min specs from company. Then after 2 small mediocre prints went for very easy longer print 6.5 hours in the print came off,paused tried to put back and tape in place sort of worked then at 9hr filament broke. Tried different filament today worked good. Loved the idea of this filament maybe return and find different company not worth the frustration

Fácil de imprimir pero me lo enviaron todo verde

Not at all as advertised. Transparent pla when advertised as white. Even under UV light the green is the only distinguishable colour when in darkness. The pictures are so far from what they advertise. Do not buy this product.

This product became brittle and broke several times while trying to do a print straight out of the package.