Petrichor Wall Plate Cover - Compatible with Google Nest Thermostat Accessory 2020 - Trim Kit, Easy Installation - Snow

Bought this to cover up the old screw holes left by the old thermostat. Works well compatible with my google Nest and easy to install.

Was properly packaged, easy to install, and is functioning as advertised/expected. Compatible with Alexa platform…Acid test; I would buy it again.

Basically brand new. No stickers for labeling my wiring but I didn’t really need them.

First – Why is lost one star. It just a piece of plastic with NO stiffening ribs to keep the edges against the wall when attached (e.g. lifting edges). For this price, I would have expected thicker plastic or stiffening ribs on the back side.Kudo’s to the product description – finding a cover plate for this strange Nest thermostat was made easer since they included the secret model number in the description, GA01334-US in my case. Nowhere on my Nest box uses the term “Nest Thermostat 2020”. Check out WIKI – they don’t call it that either.Now my rant on the whole process – I had an older nest thermostat that Google decided to make obsolete by turning off all phone / web control of the device. So I got this one from my utility company. Turns out that this one needed a 4th wire to run – so I had to pay some bucks to get that done. So much for and “easy installation”.My wire is run to a metal junction box, and only 1 of the holes can be aligned with the nest unit, the other holes just go inside junction – so nothing to grip. My original Nest (well built) and came with a plate that I could attach (multiple ways) to the wall and / or box.This whole Nest setup is a major downgrade. One star to Google

The Nest thermostat fits into the wall plate cover nicely, and it was easy to install (less than five minutes). If you already have the Nest thermostat installed, it's helpful to take a picture of how the wires connect into the ring behind the thermostat before you remove them.Steps:1) Gently pull the thermostat off the wall - it will snap off of the ring.2) Take a picture of how the wires connect into the ring so you can reconnect them correctly later.3) Push the tab for each wire connector and gently pull the wire out.4) Use a screwdriver to remove the ring from the wall.5) Fit the ring into the wall plate cover, then place back on the wall and screw it in with the same screws you removed in step 4.6) Reinsert the wires into the wire connector using the picture you took earlier as a guide.7) Snap the thermostat back into place. Make sure it's firmly seated.That's it. You may see a couple of messages on the thermostat like "provide stable power source", or "WiFi not connected", but those went away within 30 seconds and then I could see the thermostat in my Google Home app again.

Arrived quickly and as described. Fit perfectly.

Worked perfect, covered up the holes from old thermostat as intended.

Great for covering up holes from previous thermostatA little big, but the color matches exactly to the nest thermostat good stuff